Linux printf

http://wiki.bash-hackers.org/commands/builtin/printf

General

The printf command provides a method to print preformatted text similar to the printf() system interface (C function). It's meant as successor for echo and has far more features and possibilities.

Beside other reasons, POSIX® has a very good argument to recommend it: Both historical main flavours of the echo command are mutual exclusive, they collide. A "new" command had to be invented to solve the issue.

Syntax

 

printf <FORMAT> <ARGUMENTS...>

 

The text format is given in <FORMAT>, while all arguments the formatstring may point to are given after that, here, indicated by <ARGUMENTS…>.

Thus, a typical printf-call looks like:

printf "Surname: %s\nName: %s\n" "$SURNAME" "$FIRSTNAME"

where "Surname: %s\nName: %s\n" is the format specification, and the two variables are passed as arguments, the %s in the formatstring points to (for every format specifier you give, printf awaits one argument!).

 

Options

-v VAR

If given, the output is assigned to the variable VAR instead of printed to stdout (comparable to sprintf() in some way)

The -v Option can't assign directly to array indexes in Bash versions older than Bash 4.1.

In versions newer than 4.1, one must be careful when performing expansions into the first non-option argument of printf as this opens up the possibility of an easy code injection vulnerability.

$ var='-vx[$(echo hi >&2)]'; printf "$var" hi; declare -p x
hi
declare -a x='([0]="hi")'

…where the echo can of course be replaced with any arbitrary command. If you must, either specify a hard-coded format string or use -- to signal the end of options. The exact same issue also applies to read, and a similar one to mapfile, though performing expansions into their arguments is less common.

Arguments

Of course in shell-meaning the arguments are just strings, however, the common C-notations plus some additions for number-constants are recognized to give a number-argument to printf:

Number-Format	Description
N	A normal decimal number
0N	An octal number
0xN	A hexadecimal number
0XN	A hexadecimal number
"X	(a literal double-quote infront of a character): interpreted as number (underlying codeset) don't forget escaping
'X	(a literal single-quote infront of a character): interpreted as number (underlying codeset) don't forget escaping

If more arguments than format specifiers are present, then the format string is re-used until the last argument is interpreted. If fewer format specifiers than arguments are present, then number-formats are set to zero, while string-formats are set to null (empty).

Take care to avoid word splitting, as accidentally passing the wrong number of arguments can produce wildly different and unexpected results. See this article.

Again, attention: When a numerical format expects a number, the internal printf-command will use the common Bash arithmetic rules regarding the base. A command like the following example will throw an error, since 08 is not a valid octal number (00 to 07!):

printf '%d\n' 08

Format strings

The format string interpretion is derived from the C printf() function family. Only format specifiers that end in one of the letters diouxXfeEgGaAcs are recognized.

To print a literal % (percent-sign), use %% in the format string.

Again: Every format specifier expects an associated argument provided!

These specifiers have different names, depending who you ask. But they all mean the same: A placeholder for data with a specified format:

• format placeholder
• conversion specification
• formatting token
• …

Format	Description
%b	Print the associated argument while interpreting backslash escapes in there
%q	Print the associated argument shell-quoted, reusable as input
%d	Print the associated argument as signed decimal number
%i	Same as %d
%o	Print the associated argument as unsigned octal number
%u	Print the associated argument as unsigned decimal number
%x	Print the associated argument as unsigned hexadecimal number with lower-case hex-digits (a-f)
%X	Same as %x, but with upper-case hex-digits (A-F)
%f	Interpret and print the associated argument as floating point number
%e	Interpret the associated argument as double, and print it in <N>±e<N> format
%E	Same as %e, but with an upper-case E in the printed format
%g	Interprets the associated argument as double, but prints it like %f or %e
%G	Same as %g, but print it like %E
%c	Interprets the associated argument as char: only the first character of a given argument is printed
%s	Interprets the associated argument literally as string
%n	Assigns the number of characters printed so far to the variable named in the corresponding argument. Can't specify an array index. If the given name is already an array, the value is assigned to the zeroth element.
%a	Interprets the associated argument as double, and prints it in the form of a C99 hexadecimal floating-point literal.
%A	Same as %a, but print it like %E
%(FORMAT)T	output the date-time string resulting from using FORMAT as a format string for strftime(3). The associated argument is the number of seconds since Epoch, or -1(current time) or -2 (shell startup time). If no corresponding argument is supplies, the current time is used as default
%%	No conversion is done. Produces a % (percent sign)

Some of the mentioned format specifiers can modify their behaviour by getting a format modifier:

Modifiers

To be more flexible in the output of numbers and strings, the printf command allows format modifiers. These are specified between the introductory % and the character that specifies the format:

printf "%50s\n" "This field is 50 characters wide..."

 

Field and printing modifiers

Field output format
<N>	Any number: Specifies a minimum field width, if the text to print is shorter, it's padded with spaces, if the text is longer, the field is expanded
.	The dot: Together with a field width, the field is not expanded when the text is longer, the text is truncated instead. "%.s" is an undocumented equivalent for "%.0s", which will force a field width of zero, effectively hiding the field from output
*	The asterisk: the width is given as argument before the string or number. Usage (the "*" corresponds to the "20"): printf "%*s\n" 20 "test string"
#	"Alternative format" for numbers: see table below
-	Left-bound text printing in the field (standard is right-bound)
0	Pads numbers with zeros, not spaces
<space>	Pad a positive number with a space, where a minus (-) is for negative numbers
+	Prints all numbers signed (+ for positive, - for negative)
'	For decimal conversions, the thousands grouping separator is applied to the integer portion of the output according to the current LC_NUMERIC

The "alternative format" modifier #:

Alternative Format
%#o	The octal number is printed with a leading zero, unless it's zero itself
%#x, %#X	The hex number is printed with a leading "0x"/"0X", unless it's zero
%#g, %#G	The float number is printed with trailing zeros until the number of digits for the current precision is reached (usually trailing zeros are not printed)
all number formats except %d, %o, %x, %X	Always print a decimal point in the output, even if no digits follow it

Precision

The precision for a floating- or double-number can be specified by using .<DIGITS>, where <DIGITS> is the number of digits for precision. If <DIGITS> is an asterisk (*), the precision is read from the argument that precedes the number to print, like (prints 4,3000000000):

printf "%.*f\n" 10 4,3

The format .*N to specify the N'th argument for precision does not work in Bash.

 

For strings, the precision specifies the maximum number of characters to print (i.e., the maximum field width). For integers, it specifies the number of digits to print (zero-padding!).

Escape codes

These are interpreted if used anywhere in the format string, or in an argument corresponding to a %b format.

Code	Description
\\	Prints the character \ (backslash)
\a	Prints the alert character (ASCII code 7 decimal)
\b	Prints a backspace
\f	Prints a form-feed
\n	Prints a newline
\r	Prints a carriage-return
\t	Prints a horizontal tabulator
\v	Prints a vertical tabulator
\"	Prints a '
\?	Prints a ?
\<NNN>	Interprets <NNN> as octal number and prints the corresponding character from the character set
\0<NNN>	same as \<NNN>
\x<NNN>	Interprets <NNN> as hexadecimal number and prints the corresponding character from the character set (3 digits)
\u<NNNN>	same as \x<NNN>, but 4 digits
\U<NNNNNNNN>	same as \x<NNN>, but 8 digits

The following additional escape and extra rules apply only to arguments associated with a %b format:

\c	Terminate output similarly to the \c escape used by echo -e. printf produces no additional output after coming across a \c escape in a %b argument.

• Backslashes in the escapes: \', \", and \? are not removed.
• Octal escapes beginning with \0 may contain up to four digits. (POSIX specifies up to three).

These are also respects in which %b differs from the escapes used by $'...' style quoting.

Examples

 

Snipplets

• print the decimal representation of a hexadecimal number (preserve the sign)
  • printf "%d\n" 0x41
  • printf "%d\n" -0x41
  • printf "%+d\n" 0x41
• print the octal representation of a decimal number
  • printf "%o\n" 65
  • printf "%05o\n" 65 (5 characters width, padded with zeros)
• this prints a 0, since no argument is specified
  • printf "%d\n"
• print the code number of the character A
  • printf "%d\n" \'A
  • printf "%d\n" "'A"
• Generate a greeting banner and assign it to the variable GREETER
  • printf -v GREETER "Hello %s" "$LOGNAME"
• Print a text at the end of the line, using tput to get the current line width
  • printf "%*s\n" $(tput cols) "Hello world!"

Small code table

This small loop prints all numbers from 0 to 127 in

• decimal
• octal
• hex

 

for ((x=0; x <= 127; x++)); do
  printf '%3d | %04o | 0x%02x\n' "$x" "$x" "$x"
done

 

Ensure well-formatted MAC address

This code here will take a common MAC address and rewrite it into a well-known format (regarding leading zeros or upper/lowercase of the hex digits, …):

 

the_mac="0:13:ce:7:7a:ad"

# lowercase hex digits
the_mac="$(printf "%02x:%02x:%02x:%02x:%02x:%02x" 0x${the_mac//:/ 0x})"

# or the uppercase-digits variant
the_mac="$(printf "%02X:%02X:%02X:%02X:%02X:%02X" 0x${the_mac//:/ 0x})"

 

Replacement echo

This code was found in Solaris manpage for echo(1).

Solaris version of /usr/bin/echo is equivalent to:

 

printf "%b\n" "$*"

 

Solaris /usr/ucb/echo is equivalent to:

 

if [ "X$1" = "X-n" ]
then
     shift
     printf "%s" "$*"
else
     printf "%s\n" "$*"
fi

 

prargs Implementation

Working off the replacement echo, here is a terse implementation of prargs:

 

printf '"%b"\n' "$0" "$@" | nl -v0 -s": "

 

repeating a character (for example to print a line)

A small trick: Combining printf and parameter expansion to draw a line

 

length=40
printf -v line '%*s' "$length"
echo ${line// /-}

or:

length=40
eval printf -v line '%.0s-' {1..$length}

 

Replacement for some calls to date(1)

The %(…)T format string is a direct interface to strftime(3).

 

$ printf 'This is week %(%U/%Y)T.\n' -1
This is week 52/2010.

 

Please read the manpage of strftime(3) to get more information about the supported formats.

differences from awk printf

Awk also derives its printf() function from C, and therefore has similar format specifiers. However, in all versions of awk the space character is used as a string concatenation operator, so it cannot be used as an argument separator. Arguments to awk printf must be separated by commas. Some versions of awk do not require printf arguments to be surrounded by parentheses, but you should use them anyway to provide portability.

In the following example, the two strings are concatenated by the intervening space so that no argument remains to fill the format.

 

$ echo "Foo" | awk '{ printf "%s\n" $1 }'
awk: (FILENAME=- FNR=1) fatal: not enough arguments to satisfy format string
	`%s
Foo'
	 ^ ran out for this one

 

Simply replacing the space with a comma and adding parentheses yields correct awk syntax.

 

$ echo "Foo" | awk '{ printf( "%s\n", $1 ) }'
Foo

 

With appropriate metacharacter escaping the bash printf can be called from inside awk (as from perl and other languages that support shell callout) as long as you don't care about program efficiency or readability.

 

echo "Foo" | awk '{ system( "printf \"%s\\n \" \"" $1 "\""  ) }'
Foo

 

Differences from C, and portability considerations

• The a, A, e, E, f, F, g, and G conversions are supported by Bash, but not required by POSIX.

• There is no wide-character support (wprintf). For instance, if you use %c, you're actually asking for the first byte of the argument. Likewise, the maximum field width modifier (dot) in combination with %s goes by bytes, not characters. This limits some of printf's functionality to working with ascii only. ksh93's printf supports the L modifier with %s and %c (but so far not %S or %C) in order to treat precision as character width, not byte count. zsh appears to adjust itself dynamically based upon LANG and LC_CTYPE. If LC_CTYPE=C, zsh will throw "character not in range" errors, and otherwise supports wide characters automatically if a variable-width encoding is set for the current locale.

• Bash recognizes and skips over any characters present in the length modifiers specified by POSIX during format string parsing.

 

builtins/printf.def

#define LENMODS "hjlLtz"
...
/* skip possible format modifiers */
modstart = fmt;
while (*fmt && strchr (LENMODS, *fmt))
fmt++;

 

• mksh has no built-in printf by default (usually). There is an unsupported compile-time option to include a very poor, basically unusable implementation. For the most part you must rely upon the system's /usr/bin/printf or equivalent. The mksh maintainer recommends using print. The development version (post- R40f) adds a new parameter expansion in the form of ${name@Q} which fills the role of printf %q – expanding in a shell-escaped format.

• ksh93 optimizes builtins run from within a command substitution and which have no redirections to run in the shell's process. Therefore the printf -v functionality can be closely matched by var=$(printf …) without a big performance hit.

 

# Illustrates Bash-like behavior. Redefining printf is usually unnecessary / not recommended.
function printf {
    case $1 in
        -v)
            shift
            nameref x=$1
            shift
            x=$(command printf "$@")
            ;;
        *)
            command printf "$@"
    esac
}
builtin cut
print $$
printf -v 'foo[2]' '%d\n' "$(cut -d ' ' -f 1 /proc/self/stat)"
typeset -p foo
# 22461
# typeset -a foo=([2]=22461)

 

• The optional Bash loadable print may be useful for ksh compatibility and to overcome some of echo's portability pitfalls. Bash, ksh93, and zsh's print have an -f option which takes a printf format string and applies it to the remaining arguments. Bash lists the synopsis as: print: print [-Rnprs] [-u unit] [-f format] [arguments]. However, only -Rrnfu are actually functional. Internally, -p is a noop (it doesn't tie in with Bash coprocs at all), and -s only sets a flag but has no effect. -Cev are unimplemented.

• Assigning to variables: The printf -v way is slightly different to the way using command-substitution. Command substitution removes trailing newlines before substituting the text, printf -v preserves all output.